Alunautic RIBs

5 Standard Models:

7m / 8m / 9m / 10m / 11m

Hull Construction:

4mm / 6mm Welded Aluminium

Tube/ Collar Construction:

Hypalon-Neoprene

Power Options:

Outboard / Inboard / Water Jet

Alunautic RIBs are designed and manufactured by Euro Offshore BV in The Netherlands. Alunautic RIBs are available in five standard models with an overall length between 7 metre (23 feet) and 11 metre (36 feet). Alunautic build aluminium hulled RIBs for military, search & rescue, coast guard, law enforcement, superyacht and commercial operators.

Depending on the length of craft, and the intended use of the craft hull and deck construction utilises 4mm or 6 mm aluminium. Hulls and decks are chain welded on the inside and fully welded on the outside. The light weight aluminium construction of Alunautic RIB hulls, coupled with inflatable Hypalon-neoprene collars, results in reduced overall craft weight and lower fuel consumption. Lower weights assist in transportation, including launching from trailers or launch and recovery using dockside / onboard davit systems.

Alunautic offers four separate aluminium boat lines. Alunautic RIBs are available in 5 standard models with an overall length of 7m, 8m, 9m, 10m, 11m. Alunautic Deep V boats are available in 3 standard models with an overall length of 4.5m, 5.5m, 6.5m. Alunautic Work Boats are available in 3 standard models with an overall length of 4.5m, 5.5m, 6.5m. Alunautic Landing Craft Boats are available in 7 standard models with an overall length of 5.5m, 6.2, 7m, 8.5m, 10.5m, 12.5m,15.5m.

All Alunautic craft have non-skid and self bailing decks. An additional safety feature is the 2x2 separate foam filled compartments in the hull. Standard fittings on all craft are self-contained anchor compartment with access hatch, hoisting points and 2 mooring bollards. Alunautic craft can be built to international classification standards as required.